Toby
Chats A Bit
Posts: 149
|
Post by Toby on Mar 16, 2016 19:24:37 GMT
Need some advice from those who have been successful fitting a re route spacer to the back of an engine without it leaking...
I've had it off 3 times today, first time I used new paper gaskets with a smear of rubber gasket paste - leaked.
Second time just rubber gasket - leaked
Both times I've gone over all mating surfaces with wet n dry so there has been a decent flat finish.
What gasket solutions have you used, and how tight have you done the bolts up, as I'm conscious the head is ally!
Cheers!
|
|
|
Post by teamawesome on Mar 20, 2016 8:22:58 GMT
I've always used blue hylomar with no issues
|
|
Toby
Chats A Bit
Posts: 149
|
Post by Toby on Mar 23, 2016 7:26:27 GMT
Thanks for your reply mate, turns out there was a fracture in the thermostat housing I was using! Was easy sailing after working that out!
|
|
|
Post by teamawesome on Mar 23, 2016 10:55:28 GMT
Yeah, that would do it!
|
|