|
|
Post by bertieg on Aug 13, 2019 21:36:55 GMT
hi guys and girls - 2006 NC 6 speed
i keep hearing this metalic rattling noice when i rev the engine. Almost like a heat shield noise but whenever i rev it and try to listen from the outside I can't hear anything. The rattle comes from the center dash area from what i can tell.
What can it be??
Thanks
Bertie
|
|
|
|
Post by wannabe on Aug 13, 2019 23:25:07 GMT
Just to be totally clear, have you revved the engine with your head under the bonnet?
Nothing under the dash moves with the engine revving AFAIK so if there is a rattle there, I imagine it will be a loose bolt or something rubbing or something like that.
|
|
|
|
Post by davemk3 on Aug 14, 2019 7:49:26 GMT
best bet is to take a video and post it on here.
|
|
|
|
Post by bertieg on Aug 18, 2019 17:11:53 GMT
i tried to take a video but it's not doing it anymore. How strange
|
|
|
|
Post by wannabe on Aug 19, 2019 11:06:19 GMT
i tried to take a video but it's not doing it anymore. How strange I put that down to 'character'  lol |
|
|
|
Post by bertieg on Aug 19, 2019 17:27:30 GMT
IT'S BACK!!
above higher rpms it doesn't rattle
|
|
|
|
Post by davemk3 on Aug 20, 2019 18:36:01 GMT
i bet that's annoying ,on the plus side it doesn't sound like anything serious it sounds more like something vibrating.
|
|
|
|
Post by thruxton on Aug 20, 2019 19:58:46 GMT
On my 2006 2.0 NC that's the sound I got from the exhaust heat shield.
And the same revs etc.....
Regards.
Rich.
|
|
|
|
Post by bertieg on Aug 21, 2019 16:10:38 GMT
On my 2006 2.0 NC that's the sound I got from the exhaust heat shield. And the same revs etc..... Regards. Rich. Which shield is that? The one in in the engine bay? Or under the car? |
|
|
|
Post by thruxton on Aug 23, 2019 7:27:54 GMT
Good question. But I think it's the one in the engine bay. It had worked it's way right to the back of the car and was sitting where the PPF meets the diff! I only found it because I was changing the rear discs and a r b drop links. The noise, the rattle stopped a few days ago but had gone on for a month! Looking at the shield under the car it's split along one side so I used a very long metal strap and clamped it together. No noises now. here is the part..... Regards. Rich. Attachments:
|
|
Whistler
Chats A Lot
Posts: 304
Member is Online
|
Post by Whistler on Aug 23, 2019 10:51:17 GMT
This is one of those annoying problems... if you're struggling to find the cause, pay a local garage with ramp £10 for a 5 minute poke around. I'd put money on them finding the issue.
|
|
|
|
Post by bertieg on Aug 23, 2019 13:48:12 GMT
Good question. But I think it's the one in the engine bay. It had worked it's way right to the back of the car and was sitting where the PPF meets the diff! I only found it because I was changing the rear discs and a r b drop links. The noise, the rattle stopped a few days ago but had gone on for a month! Looking at the shield under the car it's split along one side so I used a very long metal strap and clamped it together. No noises now. here is the part..... Regards. Rich. I'd be so impressed if it was the exact part with the issue. I'll put it up the jack stands tonight |
|
|
|
Post by bertieg on Aug 27, 2019 5:44:26 GMT
So it was the engine cover touching the strut mount 🙄
|
|
lol
le sigh