|
Post by Rickster on May 15, 2016 18:57:01 GMT
This is a head-scratcher for about the last month when the car has been stood for a day or so - when i turn the ignition on (not cranking) I get this loud pop, It actually makes the car move so it must be quite violent! the car then runs rough for a few mins before clearing, rest of the time it runs fine. Very strange, anyone had anything similar - its a 1.8 mk1 Eunos 95 n/a but running ME221 plus decat
|
|
|
Post by Rickster on May 15, 2016 22:22:37 GMT
Just had an answer on Nutz from ME, its a ME221 issue to be resolved with the new firmware release, good news!
|
|
|
Post by myothercarsa2cv on May 16, 2016 8:38:21 GMT
I get this on my MS1'd car. I understand it fires the plugs before cranking to clear any fuel from the cylinders. No idea why it runs after but if it pops I don't crank, switch it off and wait a minute. Fine after that.
|
|